If you wash or otherwise agitate the surface that can inhibit the curing process. It is not suggested to wash your car in the direct sun light or in high temperature or when the paint is hot that is immediately after the car painting.
Is exposed car owners need to get rid of them immediately.
When to wash car after ceramic coating. Even though most ceramic coatings will dry almost instantly they still need time to fully cure so harden and give off its maximal gloss shine. Do not wash your car within 7 days of application. You do not want to heavily scrub your car as this could damage the coating therefore it will be sufficient to go over each area two times.
Every year automotive enthusiasts across the globe spend more than 2 billion on car wash car wax and other exterior protection products. In some instances it can take several days for this chemical reaction to happen. Do not wash your vehicle within 7 days of application.
After the ceramic pro has been applied to your vehicle it is critical to follow these notes to make sure it performs to it s best ability the curing process takes about 2 3 weeks to complete and reach it s peak strength. Washing can interfere with the curing process. Ceramic pro 9h is a professional grade sio2 and tio2 infused nano ceramic coating that bonds to solid and porous materials ranging from automotive glass to vinyl and paint protection film.
Use the high pressure water to pre rinse the vehicle to fill your wash bucket and rinse off. The golden rule you should always stick to after a ceramic coating is do not wash your car within 7 days of application. Stay away from film edges when using a pressure washer.
If any kind of contaminant such as bird droppings tree sap water etc. You must give both paint protection film and ceramic coating some time to completely cure on the vehicle. While it produces amazing hydrophobic properties some clients may be confused as to which car washing methods after a ceramic coat has been completed.
Then dip your wash mitt into the soap water and wash your car thoroughly on all sides one after another. You need to give both paint protection film and a ceramic coating time to fully cure on your vehicle. It is important you do not expose the vehicle to water for up to 48 hours after installation.
For an optimal car washing experience bring a 5 gallon bucket some automotive specific car shampoo ph neutral with no wax if you have a ceramic coating or ppf a microfiber wash mitt and drying towel. While their main intent is to provide a protective layer to reduce exposure to uv rays and other crap many are seeing the light by applying diy ceramic coatings on their daily drivers. By doing this water will evaporate very quickly and does not show any water spotting if there are any on your vehicle.
If you know the basic properties of these types of products you will know that once they are applied they will begin to cure and harden. Usually after 48 hours it will harden but to cure it completely three to four weeks is necessary depending on the outside temperature and humidity where the car is parked.