I find it doesn t take much paint a thin even coat is best. Powder coat water quench and gas check.
Putting bullets and powder in a ziploc bag closing the bag to contain the powder dust and gently tumbling the bag coated bullets fairly well.
Powder coating bullets tips. If bullets are oxide coated soak in lacquer thinner overnight swishing hard rinsing in fresh thinner then rinse in very hot water and simple green then a final rinse in just very hot water. Powder coating is an industrial process. He believes in god freedom and a good.
Pick up bullets one at a time with tweezers or nitrile glove. Simply tumbling bullets and powder together in a container turned out the cheapest and easiest way to coat bullets evenly. In the quest to find the easiest way to cast and seal bullets i have found this method to be the fastest and easiest yet.
Humidity can affect coating. Tap tweezers pliers on container edge if necessary to shake off excess powder back into the container. John s hand loadingjohn has been shooting since he was a kid and is now a middle aged man.
After you ve got your projectiles in the container with the bb s and powder make sure you put the lid on while making sure it is on very securely. He likes shooting rifles and handguns reloading bullet casting and the outdoors. Take about 2 ounces of the powder that you are going to use to coat them and add that.
Tips and tricks how to have success every time. Powders for powder coating are optimised for different applications whether that be long term abrasion resistance. How i powder coat rifle bullets from start to finish.
Of course the amount of powder you ll actually use is dependent upon the number of bullets you re coating. Next add about 20 or so projectiles that you want to coat. I pick my rifle bullets with tweezers and sometimes pistol bullets with nitrile glove.
You will put the cast bullets in this and add about a tablespoon of powdered paint. You can also blow excess powder with breath. Let dry and coat away.
The higher the humidity the thinner the coating. I have good results when coating between 50 100 bullets depending on bullet size. Powder coating cast lead 3 batches 3 colors 1 video.
No need for a powder coat gun or.