Carpro recommend 24 24 60cm x 60cm with complete coverage and an even layer. Follow precisely the manufacturer s manual.
Applying a ceramic coating is a rather simple process.
How to apply ceramic coating on wheels. Also do not apply the coating inside the lug nut or bolt holes or the hub. Let the coating sit for a few minutes and gently buff the coated surfaces with a microfiber towel. Shake the ceramic coating bottle as well.
To start coating your vehicle all you need to do is apply roughly 10 12 drops of carpro lite to the applicator mitt and spread evenly over a small section of the car. Three steps for smearing a ceramic coating on your wheels. In case you only have one jack stand this will increase the time required to do the task accurately.
Apply 13 drops on the application sponge and start applying from left to right then top to bottom in a two foot section. It s ok to do this outdoors just in the shade and when it s under 80 degrees and above 50 degrees outside is best. The one thing you need to remember is to never apply in direct sunlight.
Apply the coating from the inside out. Start by washing the wheels removing any dirt or contaminants. Cleanse the wheels and prep for the application.
Another coat of ceramic layer is applied on the wheels after the first coat has cured. Cquartz a nano ceramic coating that takes place of wax which is supposed to last about tw. It doesn t require advanced knowledge on paint correction or advanced car care techniques.
When your wheels are crystal clean you re ready to apply the ceramic coating. This solution is evenly spread across the face of the wheels barrels and crevices of the wheels. Once the wheels are clean and dry they are doused with the first ceramic layer.
The primary thing you should do is to take off the wheels from your vehicle. Select an area to work on. Take a foam block and warp the micro suede applicator.
Steps required to apply ceramic coating on your wheels. Once done dry the wheels to prevent any water spots from occurring along with removing pooling water which can cause issues with the nano coating. Take the micro suede applicator on your hand then make a line of the 9h ceramic coating on it.
Use a soap that won t leave a residue as this may cause adhesion problems. Video tutorial on how to apply cquartz nano coating to your wheels. Use separate soap and sponge mitt for wheels.